Zip-Enclosed Full-Body Red and Near Infrared Light Therapy Wrap

Dual-Wavelength PU Leather

What Is It

The Zip-Enclosed Full-Body Red and Near Infrared Light Therapy Wrap is a full-body wrap-style light therapy mat enclosed in a zip-fastened PU leather cover, measuring 180 x 180cm.

It combines 660nm red light and 850nm near-infrared light delivered through an array of three-chip LED diodes distributed across the full surface.

The wrap folds closed with a zipper, allowing the light-emitting panel to wrap around the body rather than lying flat like a single mat. It is operated using a handheld controller with digital display, adjustable brightness, and a timer function.

How It Works

The wrap's interior surface is fitted with 2,240 LED diodes. Of these, 1,792 are three-chip diodes combining one 660nm red light element with two 850nm near-infrared elements per diode, and 448 are dedicated 850nm near-infrared diodes.

Measured light density across the surface is 112mW/cm². The single handheld controller operates all light functions.

The user selects between a constant light mode, a 10Hz pulse mode, and a 40Hz pulse mode, in which the light output cycles on and off at the stated frequency per second rather than remaining continuously lit. Brightness is adjustable across five intensity levels (P1 to P5), and session length can be set in ten-minute increments from 10 to 60 minutes.

The device is switched on and off by pressing and holding the control button, and the digital display shows the selected mode and remaining time.

The exterior is finished in high-grade PU leather, which is scratch-resistant, water-resistant, and does not require the ironing or airing typically needed for fabric covers.

Who Is This For

This blanket is suited to people who want a wrap-around light therapy format rather than a flat mat, particularly where full-body or seated use is preferred over lying on a hard surface.

It is intended for external, at-home use and is operated independently by the user via the handheld controller, without requiring supervision or setup beyond plugging in the adapter and selecting a mode. It is not intended as a substitute for medical equipment or professional treatment, and is not designed for continuous unattended use.

What's Included

• 1 x red and near-infrared light therapy blanket, 180 x 180cm
• 1 x handheld controller with digital display
• 1 x power adapter
• 1 x user instruction manual

Technical Specifications

• Dimensions: 180 x 180cm
• LED count: 2,240 diodes (1,792 three-chip 660nm/850nm diodes, 448 dedicated 850nm diodes)
• Light density: 133.5mW/cm² (660nm/850nm combined diodes), 141.5mW/cm² (850nm-only diodes), per manufacturer test report
• Controller: single handheld unit with digital display, operating all light functions
• Operating modes: constant light, 10Hz pulse, 40Hz pulse
• Brightness settings: 5 levels (P1–P5)
• Timer: adjustable from 10 to 60 minutes in 10-minute increments
• Input voltage: AC100–240V; output: DC24V 10A; rated power: 200W
• Exterior material: PU leather outer layer with TPU protective layer
• Certifications: Tested to IEC 60598-1 and IEC 60598-2-4 luminaire safety standards (certificate ZKT-2502122090C); RoHS compliant per Directive 2011/65/EU (certificate ZKT-25091525052C-R1); EMC compliant per Directive 2014/30/EU (certificate ZKT-2502122091C); IEC 62471 photobiological safety tested (report ZKT-2607060250S); UL153 portable electric luminaire safety tested (report ZKT-2502122092S) — all five confirmed to cover model HK-110

Disclaimer

This product is intended for external, at-home use only. It is not a medical device, is not registered with the Australian Therapeutic Goods Administration (TGA), and is not intended to diagnose, treat, cure, or prevent any condition. Consult a qualified healthcare professional before use if you have any underlying health condition, are pregnant, or use an implanted medical device.